- Licensed & Insured
Data & TV Cabling Brisbane
Reliable Data & TV Cabling Brisbane
Licensed electricians installing data cabling, TV antenna points, NBN connections and structured home networking across Brisbane and Moreton Bay. Get the infrastructure right the first time.
- Fully Licensed
- Fast Response
- 300+ 5-Star Service
- Licensed Electrician
- Electrical Safety Office Approved
- Master Electricians Australia
- QBCC Licensed
Hear From Our Happy Customers
Their feedback speaks to our commitment to quality, service, and customer satisfaction.
Hear From Over 300 Happy Customers
Their feedback speaks to our commitment to quality, service, and customer satisfaction.
Data & TV Cabling Services in Brisbane
In 2026, a home or business that runs entirely on Wi-Fi is one that’s constantly fighting dropouts, dead zones, and bandwidth limitations. A properly installed data cabling network — with wired Ethernet connections to key rooms, a centralised patch panel, and correctly installed TV antenna points — is the difference between a home that works and one that’s always slightly frustrating.
Fused Air’s licensed electricians install structured data cabling, TV antenna outlets, NBN connection points, and home networking infrastructure across Brisbane and Moreton Bay. We’re Bronze Master Electricians — all our data and communications work is done to Australian Standards and comes with the same compliance documentation as any other licensed electrical job.
15+
Years
in service
Our Comprehensive Services
From residential to commercial, we provide expert electrical solutions across Queensland
Data & TV Services
Data & TV Services We Install
- Data Cabling & Ethernet Points
Cat6 and Cat6A data cabling for reliable wired internet connections in bedrooms, home offices, living areas, and outdoor entertainment spaces. Wired connections deliver faster speeds, lower latency, and more reliable performance than Wi-Fi — essential for home offices, gaming setups, and streaming.
- TV Antenna Points & Connections
Adding a TV point to a room, upgrading from a dodgy coax run to a proper antenna outlet, or connecting a new room to your home’s antenna system. We install new TV antenna points and can advise on antenna upgrades if your signal quality is poor.
- Home Network Infrastructure
Centralised patch panels, network switch installation, cable management, and structured home network setups. For homes with multiple Ethernet points, a properly patched network cabinet keeps everything tidy and makes future changes simple.
- NBN Connection Points
Installing or relocating the NBN connection point within your home, adding conduit for future upgrades, or running data cabling from the NBN entry point to your preferred router location.
- Commercial Data Cabling
Structured cabling for offices, retail premises, and commercial fitouts — including cable management, patch panel installation, and coordination with your IT provider for network commissioning.
Data & TV Cabling Cost in Brisbane
Job Type | Typical Cost (Brisbane) | Time |
|---|---|---|
Single data point (Cat6 Ethernet) | $150 – $300 | 1–2 hrs |
Single TV antenna point | $150 – $280 | 1–2 hrs |
Multiple data points (per additional point) | $80 – $150 each | Add 45–60 min |
Home network patch panel setup (with 4–8 ports) | $400 – $900 | Half day |
Commercial data cabling (per point installed) | $100 – $200 | Varies |
Full home data/TV installation (new build) | $800 – $2,500+ | 1–2 days |
*Costs depend on wall construction type, cable run distances, and number of points. Brick veneer and double-brick homes take longer to cable than timber-framed homes.
Wired Ethernet vs Wi-Fi — Should You Cable Your Home?
Wired Ethernet | Wi-Fi | |
|---|---|---|
Speed | Up to 10Gbps (Cat6A) | Up to 9.6Gbps (Wi-Fi 6) — but shared |
Reliability | Consistent — no dropouts | Affected by walls, interference, congestion |
Latency | 1–2ms | 10–50ms (higher in busy areas) |
Security | Physically contained | Can be intercepted wirelessly |
Best for | Office, streaming, gaming, NAS | Mobile devices, casual browsing |
Installation | Requires licensed electrician | Self-installable (router/access point) |
Fast Response Electrical Service
Our electricians respond quickly to diagnose and resolve your electrical problems.
Fast Response to electrical inquiries
Quick Diagnostics and Restoration of Power
Why Choosed Fused?
Your Trusted Electrical Experts in Queensland and Surrounding Areas
Licensed & Insured
Fully licensed electricians with comprehensive insurance coverage for your peace of mind
Fast Response
Rapid response electricians ready to handle your electrical issues quickly and efficiently.
Expert Service
Highly skilled electricians delivering reliable workmanship and professional electrical solutions you can trust.
Book an Electrical Service Today
Service Areas Across Queensland
Providing Reliable Electrical Services Throughout QLD
- Brisbane
- Gold Coast
- Sunshine Coast
- Ipswich
- Logan
- Redlands
- Moreton Bay
- Toowoomba
- Carins
- Townsville
- Mackay
- Rockhampton
Get Your Free Quote Today
Fill Out the form below and we’ll get back to you as soon as we see it
Frequently Asked Questions
In Queensland, installing structured data cabling (Cat6) within walls or roof spaces requires a registered cabler (ACMA Registration). Fused Air's electricians hold the appropriate registrations. Combining data cabling with electrical work in the same job means one visit, one tradesperson, one invoice.
Cat6 is the current standard for data cabling — it supports gigabit speeds and is backward compatible with older networking equipment. We install Cat6 as standard, and Cat6A for clients wanting future-proofing for 10-gigabit connections.
Yes — it's one of our most common jobs. We run cabling through walls and roof spaces with minimal impact on finished surfaces. In most cases we can achieve clean installations with only small access holes.
We can check the quality of your existing antenna cabling and connections. If the antenna itself is the issue, we can recommend an antenna specialist. We handle the cabling side — antenna installation is a separate trade.
Absolutely — and renovation time is the ideal time to do it. Running data cabling before plasterboard goes up is significantly cheaper and cleaner than cabling through finished walls.